What Are the Bathroom Sink Plumbing Rough In Heights?

The height of the plumbing rough-in depends on the size of the sink. An eight-inch depth is a standard for most sink drains. The height of the rough-in is important when installing a larger sink, as it will need more space for draining. In addition, larger sinks are usually wider.

Water Supply lines

The height of the counter under a bathroom sink and its depth determine the rough-in height. The height must be at least 12 inches higher than the depth of the sink. This height also includes the distance to the P-trap, which connects to the sewer line. The rough-in height is also important when feeding the plumbing pipe from the sink drain to the studs. It is also important to keep in mind that there must be a quarter-inch down a slope on the floor beneath the sink.

The height of the bathroom sink plumbing rough-in varies depending on the type of bathroom. The bathroom sink manufacturer will provide a guideline manual. It is important to note that the height of the drain pipe and the supply lines must be at least two to three inches higher than the base of the sink. In addition, the holes for the supply lines must be at least four inches apart and must be located two to three inches above the centerline of the sink.

Drain Lines

The proper height of the water supply and drain lines is necessary to install a bathroom sink. They must be installed at least eighteen to twenty-two inches above the floor and be placed at a suitable distance from each other. This will ensure that the bathroom vanity will function properly, and comply with building codes. Also, the proper height of these pipes will allow for the proper hookup of fixtures.

Bathroom sink plumbing rough-in heights vary, but generally, the rough-in height for a drain is twenty to twenty inches above the floor. This height varies from room to room, depending on the size and depth of the sink bowl, and the counter height.


It’s very important to measure the height of the sink and the counter to get the proper height for the plumbing rough-in heights. You want to start your plumbing rough-in height at approximately 12 inches from the base of the sink. Once you have this measurement, cut a 2-inch PVC pipe to fit the space. Then feed it through the studs. Lastly, ensure that there’s a quarter-inch-per-foot downslope.

Bathroom sink plumbing rough-in heights vary depending on several factors, including the size of the sink and the height of the bathroom vanity or kitchen counter. The height of the sink drain and supply pipes will be 18 to 20 inches above the floor. The height of the pipes connecting to the sink drain will also affect the rough-in height.

Mounting Height

When installing a new bathroom sink, it is important to consider the mounting height. This will help ensure that the sink is accessible and maintains the overall design of the room. The height should also be accurate and balanced so that the brackets are perfectly aligned horizontally. Using a level can help you achieve this goal. It is also a good idea to measure before and after installation.

Bathroom sink mounting height varies depending on the height of the bathroom and how tall the user is. For most people, the height is around 24 inches above the floor. However, the plumbing rough-in height is often between 18 and 20 inches. This allows for better placement of necessary connections, such as a P-Trap.

Placement Of Shut-Off Valves

The placement of shut-off valves in bathroom sinks is governed by local codes and manufacturer instructions. The valves must be at the correct height and should be positioned as per the manufacturer’s recommendations. A P-trap and an SAV are two common options. Both feature a compression connection between two. They can be threaded or glued to the sanitary tee.

Plumbing heights vary between locations and must be double-checked with a licensed plumber or building inspector. Shut-offs are required on supply lines in some locations, while others don’t require them. The heights of bathroom sinks and their supply lines should be at least two to three inches above the centerline.

About the Author