How Do You Install A Compact Toilet?

Install A Compact Toilet

If you have a small bathroom, you might be wondering how you can install a compact toilet. While traditional toilets can be quite large and take up a lot of space, compact toilets are much smaller and can be a great option for smaller bathrooms. Here are some tips on how to install a compact toilet:

  1. Choose the right location. When you are choosing where to install your compact toilet, make sure that you choose a location that is easily accessible and that there is enough space around it for you to move around. You also want to make sure that the location you choose is close to a water source so that you can easily connect the toilet to the water supply.
  2. Prepare the area. Once you have chosen the location for your toilet, you will need to prepare the area. This means that you will need to remove any existing fixtures or toilets that might be in the way. You might also need to do some minor construction work in order to create a space that is big enough for your compact toilet.
  3. Install the toilet. Once the area is prepared, you can start to install your toilet. Compact toilets are usually much easier to install than traditional toilets because they are much smaller. However, you still want to make sure that you follow the instructions that come with your particular toilet.
  4. Connect the water supply. One of the last steps in installing your compact toilet is to connect the water supply. This is usually a simple process, but you want to make sure that you do it correctly so that your toilet has a steady supply of water.
  5. Test your toilet. After you have installed your toilet and connected the water supply, you will want to test it out to make sure that everything is working correctly. Flush the toilet a few times and make sure that the water is flowing correctly. You might also want to check for any leaks.

Installing a compact toilet can be a great way to save space in your bathroom. Follow these tips and you will be able to install your toilet quickly and easily.

Choosing a compact toilet

Choosing a compact toilet for your bathroom is not as difficult as it may seem. The main factors you need to consider when buying one are the size and the comfort level of the toilet. If the toilet is too small, you might end up pressing your knees against the door. A toilet with a wide, elongated bowl is more comfortable to sit on, and it can save a lot of space. Also, the material used for the seat is an important factor to consider.

Choosing a model

If space is an issue, a compact toilet may be a great option. Not only is this a more space-efficient option, but it is also easier to install. Choose the model that meets your space and budget needs. The gold standard for compact toilets is the Saniflo 023 Sanicompact. This toilet has a one-piece design and connects to the nearest water line. This model is great for those with limited bathroom space or small homes.

Measuring the distance from the angle valve to the toilet

To determine the flushing distance of your new compact toilet, measure the distance from the angle valve on the wall behind the bowl to the center of the floor drain. Alternatively, you can measure from the center of the toilet’s hold-down bolts on the wall to the central floor bolt of your existing toilet. The distance between the angle valve and hold-down bolts should be at least 15 inches.

Venting a compact toilet

There are a few steps to venting a compact toilet. You can install the vent pipe on the outside wall, inside the wall, or at a slight angle. The direction of the pipe connection depends on several factors, including visibility, ease of installation, and the need for insulating the exposed vent pipe. The vent pipe is typically 4″ PVC thin wall tubing and may need additional fittings, which you can purchase from your building supply dealer. If you’re venting the toilet for winter use, be sure to place the vent stack as high as possible, or as low as possible.

About the Author